1. XY Sense
  2. Sensors, Hardware and Installations
  3. Installation Planning

How are the Hubs linked together?

Updated

In installations where there are multiple Hubs on a floor, the hubs need to be connected via an ethernet cable. 

Each floor will have a Primary Hub with a 4G Router, and each Secondary Hub on that floor needs to be connected directly to the Primary Hub to get the data connection it requires. 
 
A Sensor Link output is lost from the Primary Hub for each additional Secondary Hub that is added. 
 
There is no requirement to connect Hubs between floors.  
 
  • In the illustration below, there are 2 Secondary Hubs connected to a Primary Hub
  • Two outputs from the Primary Hub cannot be used as a Sensor Link Output (i.e. the quantity of sensors connected to the Primary Hub reduces by 6 for each Secondary Hub)
  • Each additional Secondary Hub will have 4 Sensor Link outputs
  • Each additional Secondary Hub will need to be connected directly to the Primary Hub
mceclip0.png

Articles in this section

See more
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Have more questions?
Submit a request