Entry Sensor Technical Specifications

SKU	XY-S-E* / XY-HS-E*
In-built sensor	CMOS
Technology	Low power deep learning at the edge running custom neural networks designed by XY Sense.
Power Consumption	Avg 5W
Input	RJ45 Active PoE via SenseLink-POE Adaptor connected to Gateway, or another XY Sense sensor. Provides power and data.
Output	No output
Power Supply	External - Ethernet Cat5e (or better) cable via Gateway that connects to SenseLink Power over Ethernet - Class 0 (IEEE 802.3af)
Weight & Dimensions	Length: 130.2mm / 5.13 in Width: 93.2mm / 3.67 in Height: 32.8mm / 1.29 in Weight: 300 grams / 0.55lb
Range	Depends on installation height - from 0.87m² (2.2m) to 35m² (4.9m+). See tables here.
Installation Mount Height	Minimum 2.2m / 7.22 ft, Maximum 6m / 19.68 ft
Installation Angle	+/-15° in x-axis and +/-5° in y-axis
Accuracy	>98%+ people counting accuracy
Data Output (from Sensor)	For each person detected: Anonymous In & Out counts for people counted crossing an Entry line  Anonymous metadata This is an encrypted json packet
Communication Protocol	HTTPS
Mounting Mechanism	Mounting bracket system - comes with ceiling mount. Alternatively available are: Flush ceiling mount, Rod mount (eg. from exposed ceiling)
Software Updates	Secure over-the-air remote updates
Data Usage	If deployed on SenseLink, 4G Data Included in subscription (XY-CLOUD-4G10). A typical sensor uses approximately 200MB per month.

Download our full Technical Specification Document below: